Product Overview
HN4010B Heavy Duty Industrial Vacuum Cleaner.The HN4010B is a 4.0kW heavy-duty industrial vacuum built for non-stop factory cleaning. It picks up metal chips, steel grit, glass fragments and fine dust with stable 29 kPa suction, and runs 24 hours straight. Cyclone pre-separation plus manual back-blow filter cleaning means less downtime and lower maintenance cost on the shop floor.
The HN4010B heavy-duty industrial vacuum cleaner is engineered for tough factory cleaning jobs. Powered by a 4.0kW three-phase high-pressure turbine motor, it delivers strong stable suction and supports non-stop 24-hour continuous operation. This machine handles heavy debris including metal chips, glass fragments, steel grit, stones and large volumes of dust. Built with a manual back-blow cleaning system, it lets the operator clean the filter during work, maintaining consistent suction for long shifts.
Main Specifications
| Item | Parameter |
|---|---|
| Model | HN4010B |
| Voltage | 380V |
| Frequency | 50Hz |
| Power | 4.0kW |
| Suction | 29kPa |
| Filter Area | 4.2m² |
| Inlet Diameter | 40/50mm |
| Tank Capacity | 55L |
| Weight |
110kg |
| Dimensions | 1250 × 600 × 1150mm |
Note: Dimensions are measured by hand. Slight deviation may exist, please refer to the actual product.
Standard accessories included: 5m hose, floor nozzle, crevice nozzle, round brush, hose connector, reducer, stainless steel extension wand.
Applications
Suitable for machining workshops, grinding & blasting workshops, metal fabrication, construction sites and other industrial environments. Ideal for collecting iron scraps, steel grit, stone particles, glass fragments and bulk dust. Perfect for heavy industrial cleaning tasks that require long-time continuous work.
1. Metal Processing Industry For machining, grinding, polishing and casting workshops. It collects iron filings, metal shavings and steel grit produced in cutting and sanding processes. Clean debris on machine worktables, equipment surfaces and workshop floors.
2. Stone & Glass Processing Industry Suitable for stone cutting, grinding and glass processing factories. It sucks stone dust, gravel and broken glass chips, effectively reducing dust accumulation in production areas.
3. Hardware Manufacturing Clean dry dust and small hard particles generated from hardware stamping, deburring and surface treatment, keep assembly workshops clean.
4. Factory Maintenance & General Cleaning Used for regular factory maintenance, workshop renovation cleaning and warehouse heavy dust removal. It helps factories lower dust risks and meet industrial hygiene standards.
Product Advantages
- 3-phase high-pressure turbine fan: Pure copper motor, aluminum housing. Good heat dissipation, fire & corrosion resistance, large airflow and low noise. Reliable for round-the-clock operation.
- Polyester fiber membrane filter: Acid & alkali resistant, high filtration precision. Wear-resistant and washable. Manual back-blow design easily shakes off dust to avoid filter blockage and extend service life.
- Built-in cyclone separator: Separates coarse dust particles via centrifugal force before dust reaches the filter. Reduces filter wear and prolongs filter lifespan. Great for heavy particle working conditions.
- Manual back-blow cleaning: Reverse air impact blows dust and debris off filter surface anytime. Suction stays strong without frequent filter removal and cleaning.
- Industrial plug: High load-bearing capacity, waterproof and dustproof. Secure connection for long-hour operation, prevents electric leakage risks.
- Mobile cart design: Equipped with sturdy casters, easy to move around workshops. Robust tank structure for collecting heavy waste.
Summary
HN4010B industrial vacuum cleaner is a durable heavy-duty cleaning solution for factories. With 4.0kW power, cyclone pre-separation and manual back-blow filter cleaning, it reliably tackles heavy dust and solid debris. Low maintenance and stable performance make it a practical cleaning equipment for heavy industry production lines.
